GAS DETECTION CONTROL UNITS
• economical solution for small units (boiler systems, battery charging rooms)
• 2 programmable alarm thresholds
The Surveyor 4B is a single channel controller for the detection of combustible gases in boiler plants, battery charging rooms and generally in small units requiring only one or two detectors.
It has two different alarm thresholds and is equipped with built-in relays. It can be easily mounted on a DIN rail.
– Analog and digital controller
– Low cost and easy to install
– Integrated relays
- RS-485 signal output (optional)
• up to a maximum of 8 analogue or digital detectors
• 5 programmable alarm thresholds per channel
• OR, AND, NAND, VOTING logic for alarm
• data recording
The MX 32 is a digital and analog controller for measuring gases in the atmosphere and in general for processing any compatible 4-20 mA analog or digital on/off signal.
A maximum of 8 detectors can be distributed across the 2 lines for greater savings.
The MX 32 accepts multiple modules (analog inputs, relay outputs, logic inputs, analog outputs) that can be installed hundreds of meters apart for increased system capacity and flexibility.
• up to a maximum of 32 analogue or digital detectors
• 5 programmable alarm thresholds per channel
• OR, AND, NAND, VOTING logic for alarm
• USB data recording
The MX 43 is a digital and analog controller for measuring gases in the atmosphere and in general for processing any 4-20 mA analog or compatible digital off/on signal.
A maximum of 32 detectors can be distributed across the 8 lines for greater savings.
The MX 43 is SIL-1 certified and accepts multiple modules (analog inputs, relay outputs, compatible logic input) that can be installed hundreds of meters apart for increased system capacity and flexibility. It is available in wall-mount and 19-in rack-mount versions.
• 3 programmable alarm thresholds per channel
• standard 3U 19 in. format.
• SIL2 certification
The MX 52 controller allows the connection of up to 16 analogue or Wheatstone bridge detectors.
The device can be programmed via the front panel or a computer. The MX 52 controller is safe and reliable and has SIL2 certification. It has a 4-20 mA output per channel, two alarm relays per channel, a general alarm relay and a fault relay.
• OR, AND, NAND, VOTING logic for alarm
• up to a maximum of 128 alarm relays
• redundant system
The MX 62 is a digital and analog controller for measuring gases in the atmosphere and in general for processing any 4-20 mA analog or compatible digital signal.
The electronics are fully redundant, from analog inputs to relay outputs, for the high level of functional safety required of a SIL3 certified system.
The MX 62 accepts multiple modules (analog inputs, relay outputs, analog outputs) that can be installed hundreds of meters apart for increased system capacity and flexibility.
• up to 256 detectors, 64 logic inputs and 256 relays per system
• automatic ventilation control
The CPS (Car Park System) gas detection unit uses a fieldbus and can support up to 256 detectors and as many relays connected in a network on 8 different lines. With a speed 1000 times faster than a pump system, the CPS is safer and ensures optimal ventilation management, while reducing energy consumption.
The user-friendly interface consists of a large LCD screen displaying real-time measurements, 3 LED indicators and system status icons (running, forced running, fault, alarm, low speed, high speed, etc.).
