Thermo-hygrometer + CO2, with Ethernet interface and duct mounting – WebSensor T6545
- Pipeline mounting to measure Temperature, Relative Humidity e CO2
- Alarm remote
- It's a must for the process control and external applications
- The CO2 concentration is shown on the display or indicated by a colored LED.
Product details
MEASURED VALUES
- temperature
- Relative Humidity
- Dew Point
- CO2
TEMPERATURE SENSOR
Measuring range: -30 to +60 °C
Precision: ±0.4 °C
Resolution: 0.1 ° C
HUMIDITY SENSOR
Measuring range: from 0 at 100% RH
Precision: ± 2.5 ° C
Resolution: 0.1% RH
DEW POINT SENSOR
Measuring range: da -60 to +80 °C
Precision: ±1,6°C at room temperature T<25°C and RH>30%
Resolution: 0.1 ° C
C02 SENSOR
Measuring range: 0 to 2000 ppm
Precision: ±(50ppm +2% of reading) at 25°C and 1013hPa
Resolution: 1ppm
GENERAL TECHNICAL DATA
Operating temperature: -30 to +60 °C
Channels: internal CO2 sensor
Measured values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Dismissal: Ethernet
Measuring range: 15 s
Communication protocol: WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols: Email, SNMP Trap, Syslog
Class of protection: IP30 electronics, IP20 sensors
Stem length 130mm
Warranty: 3 years
Related items
-
WebSensor with PoE – 1-Channel Thermo-Hygrometer – P8611
-
Thermo-Hygrometer – Barometer with Ethernet Interface and Relay – WebSensor H7531
-
WebSensor with PoE for Temperature, Humidity and CO2, with Ethernet interface – T6640
-
Thermo-Hygrometer / Barometer with Ethernet Interface – T7511
-
4-Channel Thermo-Hygrometer – WebSensor P8541
-
Thermo-hygrometer with Ethernet interface. Sensor for environmental monitoring – WebSensor T3511
-
Thermo-Hygrometer-Barometer with Ethernet Interface – WebSensor T7510
-
WebSensor with PoE for Temperature, Humidity and CO2, with Ethernet interface – T6641
