WebSensor with PoE for Temperature, Humidity and CO2, with Ethernet interface – T6641

WebSensor with sensor temperature, humidity e CO2 integrated with function PoE
Alarm remote
Web sensor with temperature, humidity and CO2 probes with function PoE
It's a must for the process control and external applications
The device is being Supplied with 1 meter cable probes. Optionally, cables of L= 2 or 4 meters are available.

WebSensor with PoE for Temperature, Humidity and CO2, with Ethernet interface - T6641

Product details

MEASURED VALUES
- temperature
- Relative Humidity
- Dew Point
- CO2

TEMPERATURE SENSOR
Measuring range: -30 to +105 °C
Precision: ±0.4 °C
Resolution: 0.1 ° C

HUMIDITY SENSOR
Measuring range: from 5 to 95% RH
Precision: ± 2.5 ° C
Resolution: 0.1% RH

DEW POINT SENSOR
Measuring range: da -60 to +80 °C
Precision: ±1,6°C at room temperature T<25°C and RH>30%
Resolution: 0.1 ° C

C02 SENSOR
Measuring range: 0 to 10 ppm
Precision: ±(100ppm +5% of reading) at 25°C and 1013hPa
Resolution: 1ppm

GENERAL TECHNICAL DATA
Operating temperature: -20 to +60 °C
Channels: 1x connectable temperature+humidity probe, 1x external CO2 sensor
Measured values: dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
Dismissal: Ethernet
Measuring range: 2 s; CO2 15 s
Communication protocol: WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols: Email, SNMP Trap, Syslog
Supply: via Ethernet according to IEEE 802.3af or 5Vdc
Class of protection: IP30 electronics, IP40 Temp. and Humidity sensors; IP2 CO65 sensor
External probe cable length T+RH: cable length 1 meter (2 or 4 meters optional)
External CO2 probe cable length: 1 meter (choice of 2 or 4 meters)
Warranty: 3 years