WebSensor with PoE | 2 channels with flood sensor and binary inputs – P8653

WebSensor for measurements Temperature e Relative Humidity
With flood sensor and (3) binary inputs
With PoE and Communication Ethernet with PoE
Designed to measure temperature or relative humidity from up to two external probes. This allows you to measure values from two different points with a single device.

WebSensor with PoE | 2 channels with flood sensor and binary inputs - P8653

Product details

MEASURED VALUES
- temperature
- Relative Humidity
- Binary input

TEMPERATURE SENSOR
Measuring range: -55 to +105 °C
Precision: based on the connected DSxx probe
Resolution: 0.1 ° C

HUMIDITY SENSOR
Measuring range: based on the connected DSxx probe
Precision: ±2.5 °C RH from 5 to 95% at 23°C
Resolution: 0.1% RH

FLOOD SENSOR
Use: intended for internal use only
Cable length: 2.5 meters (with extension)
Two-wire connection: red wire - active, black wire - GND, powered directly by P8653

PLANARY INPUT
Voltage contact parameters: Input voltage level for "L": < 1,0 V;
Input voltage level: for "H": > 2,5 V;
Internal resistivity of the voltage source: < 2kOhm
Input voltage range: 0 to +30 V
Voltage-free contact parameters: Voltage on the non-closed contact 3,3 V
Current through closed contact: 0,1mA
Maximum contact resistivity: < 5kOhm

GENERAL TECHNICAL DATA
Operating temperature: -20 to +60 °C
Channels: 1x nebo external temperature probe; 1x connectable temperature+humidity probe
Dismissal: Ethernet
Measuring range: 2 s
Communication protocol: WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols: Email, SNMP Trap, Syslog
Supply: Power over Ethernet according to IEEE 802.3af or 5Vdc
Class of protection: IP30K
Warranty: 3 years